technical data sheet tnc 50 bulkhead jack 56K507-801N4 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-17, mil-prf-39012, din en 122200 documents assembly instruction 51 t panel piercing b 2 material and plating connector parts material plating center contact beryllium copper gold, min. 0.8 m, over chemical nickel outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe crimping ferrule copper flash white bronze over silver(e.g. optargen?)
technical data sheet tnc 50 bulkhead jack 56K507-801N4 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance 50 frequency dc to 10 ghz return loss 25 db, dc to 1 ghz 23 db, 1 to 2.5 ghz 20 db, 2.5 to 3 ghz insertion loss 0.05 x [ghz] f db, dc to 3 ghz insulation resistance 5 x10 3 m center contact resistance 1.5 m outer contact resistance 1 m test voltage 1500 v rms working voltage 500 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz - limitations are possible due to the used cable type ? mechanical data mating cycles min. 500 center contact captivation: axial 15 n coupling test torque max. 1.7 nm recommended torque 0.46 nm to 0.69 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. b shock mil-std-202, meth. 213, cond. g moisture resistance mil-std-202, meth. 106 2002/95/ec (rohs) compliant tooling crimping tool 11w150-000 crimp insert 11w150-402 suitable cables rg 196 a/u, rg 178 b/u packing standard 100 pcs in bag weight 12.1 g/pce draft date approved date rev. engineering change number name date rong fang 20/04/05 j. krautenbacher 05/10/06 b00 06-0478 s. huber-siegl 05/10/06 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|